Page 1 of 1

qubo digital: power data from the trainer to peripeadal

PostPosted: Mon Mar 23, 2015 6:16 am
by guapo73
Hi Adam is it possible the transmission of the power data from Qubo Digital to Peripedal using the option "Power Data Source ANT+ Bike Power Meter?
If it is not possible and i need to use the trainer power curve can you make it available in the sw?
Thx

Re: qubo digital: power data from the trainer to peripeadal

PostPosted: Wed Mar 25, 2015 3:15 pm
by Burnt Toast
guapo73 wrote:Hi Adam is it possible the transmission of the power data from Qubo Digital to Peripedal using the option "Power Data Source ANT+ Bike Power Meter?
If it is not possible and i need to use the trainer power curve can you make it available in the sw?
Thx


From the FAQ:

Can an ANT+ device (i.e. Garmin) be used with this trainer to monitor training data or do I need to install the My E-Training app on a smartphone or tablet?

Sensors using ANT+ protocol display data on any ANT+ cycle computer (i.e. Garmin) . Bluetooth Smart sensors can be used together with the My E-Training app on a smartphone or tablet. Sensors that use both ANT+ and Bluetooth Smart protocols can be used on smartphones/tablets as well as on ANT+ cycle computers.

That tells me that with an Ant Stick, you should be able to sync with Peripedal as a power meter. If you haven't purchased the trainer yet, you may want to wait for Adam's reply. If you have purchased it, try it out.

Re: qubo digital: power data from the trainer to peripeadal

PostPosted: Wed Mar 25, 2015 9:59 pm
by guapo73
Burnt Toast wrote:
guapo73 wrote:Hi Adam is it possible the transmission of the power data from Qubo Digital to Peripedal using the option "Power Data Source ANT+ Bike Power Meter?
If it is not possible and i need to use the trainer power curve can you make it available in the sw?
Thx


From the FAQ:

Can an ANT+ device (i.e. Garmin) be used with this trainer to monitor training data or do I need to install the My E-Training app on a smartphone or tablet?

Sensors using ANT+ protocol display data on any ANT+ cycle computer (i.e. Garmin) . Bluetooth Smart sensors can be used together with the My E-Training app on a smartphone or tablet. Sensors that use both ANT+ and Bluetooth Smart protocols can be used on smartphones/tablets as well as on ANT+ cycle computers.

That tells me that with an Ant Stick, you should be able to sync with Peripedal as a power meter. If you haven't purchased the trainer yet, you may want to wait for Adam's reply. If you have purchased it, try it out.

yep i got the ant stick and in the next couple of days i will receive the home trainer.....so i will try. Thx Mate

Re: qubo digital: power data from the trainer to peripeadal

PostPosted: Sun Mar 29, 2015 9:33 am
by guapo73
it seems that peirpedal is not able to find any power sensor from the qubo digital.. Adam any idea or update or fix? Is it possible have the power curve for digital qubo in order to work with the data figured out with the software?
Thx

Re: qubo digital: power data from the trainer to peripeadal

PostPosted: Sun Mar 29, 2015 12:38 pm
by Adam
Hi guapo73,

My guess is that Elite is not transmitting the power out over the standard ANT+ channel. The FAQ that Burnt Toast pointed out seems to suggest otherwise, but they may have been referring to ANT+ sensors in general (i.e. Bike Speed/Cadence), which would not make much sense as an answer to that question.

You should contact Elite and ask them if their trainer transmits power over the standard ANT+ network that can be picked up with an ANT+ head unit.

Unfortunately a power curve won't work for this trainer, as the power curve is adjustable based on its input settings, so there is no way for PeriPedal to calculate the power. Sorry!

Adam

Re: qubo digital: power data from the trainer to peripeadal

PostPosted: Sun Mar 29, 2015 4:29 pm
by guapo73
Adam wrote:Hi guapo73,

My guess is that Elite is not transmitting the power out over the standard ANT+ channel. The FAQ that Burnt Toast pointed out seems to suggest otherwise, but they may have been referring to ANT+ sensors in general (i.e. Bike Speed/Cadence), which would not make much sense as an answer to that question.

You should contact Elite and ask them if their trainer transmits power over the standard ANT+ network that can be picked up with an ANT+ head unit.

Unfortunately a power curve won't work for this trainer, as the power curve is adjustable based on its input settings, so there is no way for PeriPedal to calculate the power. Sorry!

Adam

ok thanks.

Re: qubo digital: power data from the trainer to peripeadal

PostPosted: Sun Mar 29, 2015 8:04 pm
by Burnt Toast
guapo73 wrote:
Adam wrote:Hi guapo73,

My guess is that Elite is not transmitting the power out over the standard ANT+ channel. The FAQ that Burnt Toast pointed out seems to suggest otherwise, but they may have been referring to ANT+ sensors in general (i.e. Bike Speed/Cadence), which would not make much sense as an answer to that question.

You should contact Elite and ask them if their trainer transmits power over the standard ANT+ network that can be picked up with an ANT+ head unit.

Unfortunately a power curve won't work for this trainer, as the power curve is adjustable based on its input settings, so there is no way for PeriPedal to calculate the power. Sorry!

Adam

ok thanks.

Do you have a Garmin and if so, can the Garmin read the trainers info?